Early Run of My V-Twin model Engine by Terry Mayhugh

Just completed … mostly machined on a Tormach PCNC mill with SolidWorks/SprutCam CAD/CAM plus manual lathe work on the cast iron cylinders, pistons, rings and crank. One inch bore with 1.25 inch stroke. Built entirely from material from a local scrap yard. Plan set available from Jerry-Howell.com. Mayhugh engine V-twin vtwin tormach howell

Read: 499
  • Site Comments

Write a comment

Making combination bamboo bow |

我用碳化竹製造了一把可上弓臂與下弓臂可組合的積層弓,磅數達38磅。中間層使用了竹子與楓木、巴西胡桃木的結合。 我影片內使用的牧田DT04R1 12V Max CXT …

0 51 24 September 2020
Building a Log Home in the Canadian Wilderness (Pt.3/5)

Building a Log Home in the...

24 September 2020
Saw Protecting Fingers

Saw Protecting Fingers...

23 September 2020